E-mail:

fannie@labelsmfg.com
Guangzhou YiLang Garment Accessories Co.,Ltd

Telephone:

+86-15920427887

Knowledge
Home > Knowledge > Content

Knowledge introduction of heat transfer

 Heat transfer as a garment accessories products, thermal transfer heat transfer is a category of printing industry.


Heat transfer classification

 Heat transfer heat transfer process a wide range of new technology is still constantly derived, so if you want to specifically put forward a concept I am afraid it is still very difficult. So far, thermal transfer heat transfer is still not a specific classification, but the general framework can be divided, according to feel and visual effects are divided into: flat heat transfer and three-dimensional heat transfer. Flat heat transfer and include: offset heat transfer, swimsuit heat transfer, pearl heat transfer, South Korea bright heat transfer, South Korea dumb heat transfer, gold / silver on heat transfer, gold / silver foil heat transfer, Crystal Symphony Tang Hua, sports mark heat transfer and so on. Three-dimensional heat transfer include: Foam heat transfer, flocking heat transfer, glass beads heat transfer, reflective heat transfer, gold / silver oncooling. Both types of heat transfer are low temperature heat transfer.


Offset heat transfer

 Sublimation heat transfer is independent of the above two kinds of heat transfer outside of a heat transfer process, are high temperature transfer, also known as transfer printing or gas-stained. This process is different in the material and the effect of the hot stamping, the print is printed on the surface of the PET film pattern, with white glue and resin glue, hot stamping on the fabric, such as a layer of rubber, Feel smooth, bright color, vivid patterns, can be applied to cotton, polyester, knitted fabrics, non-woven fabrics, leather products, luggage fabrics, etc .; sublimation heat transfer only applies to light-colored, white polyester fabric, Hot stamping effect is no touch, the pattern infiltrated inside the fabric, bright colors, patterns clear.


 According to the method of stamping can be divided first tear, cold tear and hot tear. Glass beads heat transfer is the first tearing process is in the hot stamping before the pattern from the top of the PET film torn down, positioned to be printed on top of the fabric. Cold tearing process include: glossy heat transfer, dumb heat transfer, flocking heat transfer, gold and silver foil heat transfer, reflective heat transfer, crystal Symphony heat transfer, pure gold onion heat transfer. Cold tearing refers to the hot stamping process, heat press alarm sounded, lifted heat press machine, take out fabrics and fabrics attached to the heat transfer pattern above, let it cool down and then torn down; Heat transfer, spot color silk screen heat transfer, glitter heat transfer, foam heat transfer, pearl heat transfer, sublimation heat transfer, water wash heat transfer. Hot tearing refers to the hot stamping process, heat press alarm sounded, lifted heat press machine, take out the fabric immediately tear off the above PET film. Of course, this division is not absolute, such as offset heat transfer can also be made cold tearing company, according to the fabric and requirements of the producer may be.


 Heat transfer a wide range of uses, a wide range, technology, the effect of continuous updating, all over the process is not the same, as well as high-frequency heat transfer, laser heat transfer and so on. Different names, also known as hot flowers, transfer printing.