E-mail:

fannie@labelsmfg.com
Guangzhou YiLang Garment Accessories Co.,Ltd

Telephone:

+86-15920427887

Knowledge
Home > Knowledge > Content

Classification of Woven Labels


Acording to the process of woven labels, they are mainly divided into woven edge and cutting edge.


Woven edge label:

When we need to woven the required trademark at one time according to the width, we call it the selvage label.

This process avoids many of the disadvantages of trimming, but the yield is low. There is also a flat/satin surface, which is characterized by a soft and firm feel. It is more suitable for higher fashion products, such as fashion, suits, etc. It is very much used by quality Japanese manufacturers, and machines are also made in Japan. The woven border is generally made of satin, but the satin background is difficult to express, and the usual hot coloring/dyeing processes solve this problem.

The selvage machine generally has a wooden shuttle, and the color cannot exceed four in general; there are also crochet machines, which can also weave the quality of various processes, and can even add transparent polyester yarn in the warp yarn, which is called a crochet crochet machine.

In addition to the width, total length of each color, and process related, the cost of cloth labels is also the type of yarn used. JB series yarns are commonly used in the world


Cutting edge label:

As the name implies, on a special high-speed machine, weaving a piece of cloth like a weaving cloth and cutting it into strips according to the width of the subject. Because of the thermal melting properties of polyester, the yarns stick to each other when they are cut and do not lap. Also for this reason, the appearance and feel will be affected by a certain degree, and a good machine will be better. Using an ultrasonic cut will be better than an ordinary electric knife. The loaded cloth labels can be directly disposed and sent to the garment factory for processing; if the requirements are strict, cut-and-break processing is still required. The maximum width of a single computerized jacquard assembly is 20cm. By increasing the number of jacquard assemblies, a wider trademark can be woven and larger shapes can be machined.

custom woven label